Working Platforms And Bearing Capacity Assessments Of Sand Overlying Clay Using Finite Element Limit Analysis

- Goodall, Sean J., Merifield, Richard S.

Practical considerations for the application of a survival probability model for rockfall

- Guccione, Davide Ettore, Buzzi, Olivier, Thoeni, Klaus, Giacomini, Anna, Fityus, Stephen

Collaborations In Geotechnical Engineering: Lessons From The Ballina Bypass And The National Soft Soil Field Testing Facility

- Indraratna, Buddhima, Rujikiatkamjorn, Cholachat, Kelly, Richard, Kianfar, Kourosh, Sloan, Scott

On the common criticism of initial moisture content bias in the shrink-swell test

- Fityus, Stephen, Burton, Glen

Experimental study on influence of impact angle on fragmentation of brittle blocks upon dynamic impact.

- Guccione, D. E., Fityus, S., Gregg, N., Giacomini, A., Buzzi, O.

Mud pumping under railtracks: mechanisms, assessments and solutions

- Nguyen, Thanh Trung, Indraratna, Buddhima, Kelly, Richard, Phan, Nghi Minh, Haryono, Ferry

Comparison of imaging technologies for geotechnical investigation of abandoned coal mine workings: A case study

- Johnston, J. A., Semmler, M., Montgomery, M., Fityus, S., Lea, J., Black, K., McDonald, S.

Use of low-cost terrestrial and aerial imaging sensors for geotechnical applications

- Thoeni, Klaus, Santise, Marina, Guccione, Davide E., Fityus, Stephen, Roncella, Ricardo, Giacomini, Anna

A comparison of in-situ and laboratory resistivity measurements in soft clay

- Kelly, R., Pineda, J. A., Suwal, L.

Dissipation tests in saline environment

- Imre, E., Bishop, D., Bates, L., Fityus, S., Bakacsi, Z., Rajkai, K., Juhász, M.

Enhanced data interpretation: combining in-situ test data by Bayesian updating

- Huang, J., Kelly, R., Sloan, S. W.

Geotechnical characterization of Ballina clay

- Pineda, J. A., Kelly, R. B., Suwal, L., Bates, L., Sloan, S. W.

On the determination of the undrained shear strength from vane shear testing in soft clays

- Wilson, L. J., Kouretzis, G. P., Pineda, J. A., Kelly, R. B.

Session report on sampling and laboratory testing

- Pineda, J. A.

Some comments on the CPTu and DMT dissipation tests

- Imre, E., Bishop, D., Bates, L., Fityus, S., Hortobagyi, Z., Juhasz, M.

An evaluation of the tilt test for granular materials

- Fityus, S. G., Simmons, J. V.

Advances in offshore and onshore anchoring solutions

- Gaudin, C., O'Loughlin, C. D., Randolph, M. F., Cassidy, M. J., Wang, D., Tian, Y., Hambleton, J. P., Merifield, R. S.

Advancing Australia's facilities for physical modelling in geotechnics

- Cassidy, M. J., Gaudin, C., Bates, L., Indraratna, B., Nimbalkar, S., O'Loughlin, C. D., White, D. J., Sloan, S. W.

Analysis of installation forces for helical piles in clay

- Hambleton, J. P., Stanier, S., Gaudin, C., Todeshkejoei, K.

Dynamic embedment of projectiles in clay

- O'Loughlin, C. D., Nazem, M., Chow, S. H., Randolph, M. F., Gaudin, C., White, D. J.